Best Power Supply For Bitcoin/Ethereum Mining Oem - In Stock PSU For All Miner Devices 2019
Best Power Supply For Antminer S7 on April 2024 Shopping Deals at Bestonio.com
Specification Input Voltage: 100-264V AC Frequency Range: 47-63HZ Input Voltage of 110V: 1000W, 83.3A Input Voltage of 220V: 1800W, 150A Power Supply Conversion Effeciency: 95%
The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
Features: Small size but in large power. Server power supply is super stable. High efficiency,easy to use, just plug it in and open it. Good heat dissipation and long service life. Easy to use and to operate at affordable prices It has been through testing standards for safe using. A professional power supply for GPU video card mining. Quality in s... [Read More]
*POWER SUPPLY IS NOT INCLUDED* Bitmain recommends using the APW3++ or APW7 power supply. AntMiner V9 Specifications:1. Hash Rate: 4.0 TH/s ±5%2. Power Consumption: 1027W ±10% (at the wall, with Bitmain PSU, 93% efficiency, 25C ambient temp)3. Power Efficiency: 0.253 W/GH ±7% (at the wall, with Bitmain PSU, 93% efficiency, 25°C ambient temp)4.... [Read More]
Note:The Voltage Range is AC 176~264V,if the Voltage in Your Area is 110V You Will Need a Power Inverter to Make it Work. Model:1600W Size(L*W*H): 25.5 x 9 x 4.5 cm Cable Length: 39 cm Connectors: 6 PIN X 10 Pcs Number of Interfaces:10 Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 Ant Series Mining Machine Input Characteristic: Voltage Range: A... [Read More]
Designed for the AntMiner L3+/S9/T9/D3. Includes ten 6-pin PCIe connectors.Maximum output: 1200W @ 110v-120v, 1600W @ 220v-240v.Power cord not included, requires standard PC power cable (C13)
-Made of high quality 14 AWG stranded copper THHN wires. -capable of 20 amps or 240 watts per cable. -6 pin power male plug to cable end. - 24 inch length You will receive five 24 inch 2 wire PCIe cables
REQUIRES 205-264 VOLTS TO WORK! The APW3-12-1600 Series AC-DC PSU is specifically designed with mining operations in mind, and combines high conversion efficiency and a strong dynamic performance into a power dense package. It also features short circuit, overload, overheat, low voltage and overload protections. The air flow direction runs from the... [Read More]
1. Hash Rate: 4.73 TH/s ±5% 2. Power Consumption: 1210 W (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.25 J/GH (at the wall, with APW3, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 12.0V+5%, should not be less than 12.0V 5. Chip quantity per unit: 162x BM1385 6. Dimensions: 301mm(L)*123mm(W)*155mm(... [Read More]
Features: 200-240 volt AC input design. Two for Antminer R4 (with PCI-e extension line), two for Avalon A6 / two for Spondoolies SP-20, four for Antminer S5. Small size but in large power. Server power supply is super stable. High efficiency,easy to use, just plug it in and open it. Good heat dissipation and long service life. Easy to use and to op... [Read More]
Features:Efficiency, very quiet, stable performance.Heavy-duty protections, including Over Voltage Protection, Under Voltage Protection, Over Current Protection, Over Power Protection, and Short Circuit ProtectionConversion performance is stable, up to 90+With cooling fan, safer for using thisWith ready to use harnessDescription:Power Supply:2880 W... [Read More]
MONIPA 1600W Mining Power Supply for S7 S9 L3 + D3 Ant Series 6Pin*10pcs Machine Note: The Voltage Range is AC 176~264V, if the Voltage in Your Area is 110V You Will Need a Power Inverter to Make it Work. Specification: Model:1600W Size(L*W*H): 25.5 x 9 x 4.5 cm Cable Length: 39 cm Connectors: 6 PIN X 10 Pcs Number of Interfaces:10 Fit For: S9(12.5... [Read More]
Features:Efficiency, very quiet, stable performance.Heavy-duty protections, including Over Voltage Protection, Under Voltage Protection, Over Current Protection, Over Power Protection, and Short Circuit ProtectionConversion performance is stable, up to 90+With cooling fan, safer for using thisWith ready to use harnessDescription:Power Supply:2880 W... [Read More]
Features:Efficiency, very quiet, stable performance.Heavy-duty protections, including Over Voltage Protection, Under Voltage Protection, Over Current Protection, Over Power Protection, and Short Circuit ProtectionConversion performance is stable, up to 90+With cooling fan, safer for using thisWith ready to use harnessDescription:Power Supply:2880 W... [Read More]
1800W Special Power Supply For S7 S9 Mining Machine Note:The Voltage Range is AC 176~264V,if the Voltage in Your Area is 110V You Will Need a Power Inverter to Make it Work. Model: 1800W Shell Material: Aluminum Size(L*W*H): 25.5 x 10 x 4.5 cm Cable Length: 39 cm Power Cord Length: 1.5 Meter Connectors: 6 PIN X 10 Pcs Number of I... [Read More]
Model:1600W Size(L*W*H): 25.5 x 9 x 4.5 cm Cable Length: 39 cm Connectors: 6 PIN X 10 Pcs Number of Interfaces:10 Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 Ant Series Mining Machine Input Characteristic Voltage Range: AC 176~264 V Input Rated Voltage: AC 200~240 V Starting Inrush Current: ≤80 A Maximum Input Current: ≤10 A Efficiency: ≥92% Outp... [Read More]
© Bestonio.com - all rights reserved - Sitemap Bestonio.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com