Top 10 3D Printer Motors [2018]: Nema 17 2 Phase 4-wire Stepper Motor 1.8 Degree for 3D Printer (42
Best Nema 17 Stepper Motor on April 2024 Shopping Deals at Bestonio.com
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's a good ideal for 3D printers, as well as CNC and robotics applications. Important notice: Some custom... [Read More]
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in). Electrical Specification *Manufacturer Part Number: 17HS15-1504S-X1 *Motor Type: Bipolar Stepper *Step Angle: 1.8 deg *Holding Torque: 45Ncm(63.74oz.in) *Rated Current/phase: 1.50A *P... [Read More]
This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It's very good choice for 3D printer. Electrical Specification: * Manufacturer Part Number: 17HS19-2004S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 59Ncm(8... [Read More]
General Specification: Step angle accuracy: + - 5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20% Temperature rise: 80deg Max(rated current,2 phase on) Ambient temperature ----------20deg ~+50deg Insulation resistance:100M Min,500VDC Insultion Strength--------500VAC for one minute Note:We can manufacture products acco... [Read More]
Features: Durable with alloy steel material. Strong mounting. Easy to install. Powder coated finish. 3pcs of mounting bracket - 90 degrees. Fit for 42mm NEMA17 stepper motor. Package Included: 3 x Nema 17 Stepper Motor Mounting Bracket 12 x M4 Screws 12 x M3 Screws 1 x Inner Hexagon Spanner
This is Short Height Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in). Electrical Specification: * Manufacturer Part Number: 17HS08-1004S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 13Ncm(18.4oz.in) * Rated Cur... [Read More]
FYSETC is a professional supplier of 3D Printers related accessories products. It has a professional R&D team and high quality after-sales service to ensure that you can enjoy your shopping. Specifications: Model Type: MS17HD4P484A-01 Condition: 100% brand new Number of phase: 2 Step angle: 1.8 degree Rated Voltage: 4.83 V DC Rated Current: 0.84A H... [Read More]
Product name: Bipolar Stepper Motor Size:42*42*23mm Phase: 2 PhaseCurrent: 1 A/Phase Phase Resistance: 3.5ohms Inductance: 3.2 ± 20% mH/Phase Holding Togque: 13 N.cm(18.4oz.in) Insulation Class: B Step Angle: 1.8±5% /STEPConnection: Black(A+), Green(A-), Red(B+), Blue(B-)Warning: Make sure the motor connect to a constant current or chopper driv... [Read More]
This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 45Ncm(63.7oz.in). It's ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. The motor is supplied with a 1 metre long power cable with a 4-pi... [Read More]
Specifications for model: MS17HD2P4100 Phases: 2 Frame Size: NEMA17(42mm) Step Angle: 1.8deg Overall length: 39.8 mm (1.57in.) 1 Stack Rated Current: 1A Holding Torqe: 0.48Nm Resistance: 3.9 Ω Nominal Inductance: 8.9 mH Detent Torque: 15 mNm Rotor Inertia: 57 g.cm² Coil Type: Bipolar Terminal Number: 4 Connection type: P Insulation ... [Read More]
Specifications: Holding torque: ≥290mN.m (I = 1.0A) Cogging torque: 20mN.m REF Rated voltage: DC 3.4V Rated current: DC 1.0A Wnding Inductance: 5.4×(1± 20%)mH Step angle: 1.8°±0.09° Max Blank switching frequency: ≥ 2000pps Rotational inertia: 43.2g.cm 2 Motor Weight: 0.22 kg / pcs REF Phrase: 2 Package Included: 4×Nema 17 Stepper Mo... [Read More]
Feature: PWM chopper type bipolar stepper motor driver IC 1. 9V-42V DC power supply 2. H bridge bipolar constant phase flow drive 3. the maximum 4.0A of the eight kinds of output current 4. the largest 32 subdivision of the 6 models are optional 5. input signal high speed photoelectric isolation 6. common-anodestandard single pulse interface 7. o... [Read More]
Stepper motor Specification: Motor Type: Bipolar Stepper Step Angle: 1.8 deg. Holding Torque: 59Ncm(84 oz.in) Rated Current/phase: 2.0A Frame Size: 41 x 41mm Body Length: 46mm Shaft Length: 22mm Weight: 380g Mounting Bracket Kit Specification: NEMA 17 Mounting Bracket - 90 degrees - M3 Screws Included (4) - Mounting Holes: 31mm center-to-center -... [Read More]
Product Parameters: Product name: Bipolar 42 Stepper Motor Holding torque: 0.46 Nm/ 65 oz-in Working voltage: DC 9-42V Rated current: 1.7A Resistance: 2.1 ohm Inductance: 4mH Rotor inertia: 55gcm2/ 0.30oz-in2 Weight: 0.28kg Length: 39.5mm/ 1.56 inch Phrase: 2 Step angle: 1.8° Motor frame size: 42*42mm Wiring: Black (A+); Green (A-); Red (B+); Blu... [Read More]
CNC Shield Board: Latest CNC Shield Version 3. 0 for Arduino. GRBL 0. 9 compatible. 4-Axis support (X, Y, Z , A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13). 2 x End stops for each axis (6 in total). Coolant enable. Compatible with A4988 or DRV8825 stepper driver. Runs on 12-36V DC. DRV8825 Stepper Motor ... [Read More]
Iverntech NEMA 17 Stepper Motor with Integrated 310mm T8 Lead Screw Specifications: Led screw diameter: 8mm Lead screw length: 310mm (±1mm) Motor size: 42 x 42 x 40 mm(L W H) Step angle : 1.8 degree Nut material: Brass Holding Torque: 400mN*m Thrust(full step): 12.5kg Rated Current/Phase: 1.5A Rate Voltage: 3.3v Rated Resistance/Pha... [Read More]
Description: Motor type: Bipolar Stepper Motor Length: 40mm Phase Resistance: 1.5Ohm Phase Inductance: 2.8mH Detent Torque: 2.2N.cm Rotor Inertia: 54g.cm2 Holding Torque: 40N.cm Motor Weight: 280g Step angle: 1.8 deg Step angle accuracy: + - 5%(full step, not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20% Temperature rise: 80deg Ma... [Read More]
Description- Two Pack - NEMA 17 Mounting Bracket - 90 degrees- M3 Screws Included (8)- Mounting Holes: 31mm center-to-center- Max Collar Diameter: 22mm- Powder-coated steel- Nema17 Standard- Mounting Holes: 31mm center-to-center- Max Collar Diameter: 22mmPackage Including1 * 2 Pack - Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws... [Read More]
This high torque and precision bipolar Nema 17 stepper motor with 0.9° step angle (400 steps/revolution). Each phase draws current 2A, allowing for a holding torque of 46Ncm(65.1oz.in). Electrical Specification * Manufacturer Part Number: 17HM19-2004S * Motor Type: Bipolar Stepper * Step Angle: 0.9° * Holding Torque: 46Ncm(65.1oz.in) * Rated C... [Read More]
Overview: This driver is an industrial-grade fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with other analog or TB6600 chips driver, ... [Read More]
© Bestonio.com - all rights reserved - Sitemap Bestonio.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com